Events Booking - Search Events

Events from location : Almaty[View Map][Get Directions]

A profitable development of an oil or gas field start with a good understanding of the subsurface as a basis for efficient and successful field management. The use of AVO and inversion techniques helps to create the best possible petrophysics subsurface model. Improved discrimination of reservoir units are made and models are generated using logs and seismic data. These techniques lead to highly accurate or highly probable (static) subsurface models compatible (if correctly up-scaled) to dynamic reservoir models obtained from reservoir engineering measurements and computations.

The correct use of seismic attributes, well data analysis, AVO and seismic inversion is essential to establish subsurface models that can be used for improved field development planning and design.

At the end of the course participants will understand basic concepts in quantitative seismic analysis and interpretation based on AVO, well-to-seismic calibration and inversion techniques. Participants will consolidate their understanding of modern technology with recent field study examples and practical workshop exercises.

Event Date 10-23-2017 8:00 am
Event End Date 10-27-2017 5:00 pm
Registration Start Date 06-01-2017
Capacity 16
Registered 0
Available place 16
Cut off date 10-16-2017
Individual Price $2,950.00
Location
Almaty
Gaidar St, Almaty, Kazakhstan
Almaty
$2,950.00 16

We are no longer accepting registration for this event

This course builds on the NExT Fundamentals of Petroleum Geomechanics course and starts to investigate geomechanics beyond simple elastic, isotropic behaviour. After a brief review of fundamental concepts, earth stresses and the Mechanical Earth Model, the course looks at the impact of reversible and non-reversible geomechanical behaviour on drilling, stimulation, sand production and injection looking specifically at thermal, depletion and compaction effects. The course then investigates anisotropy, its nature and effect on geomechanics, and its significance and influence on well construction and field development. The course also covers salt, introducing the mechanics of salt, short term and long term behaviour, as well as the impact on drilling both sub-salt and pre-salt.

At the end of this course participants will recognize the differences and significance of reversible and non-reversible in petroleum applications of geomechanics both in the wellbore and reservoir. They will under-stand the importance of anisotropic behaviour in rocks, know the methods used to measure anisotropy and the effect on well construction and field development. They will also be know about the short and long term mechanical behaviour of salt, the effect of salt on the local stress state and what needs to be considered when developing fields either created by or accessed through salt.

Event Date 12-11-2017 8:00 am
Event End Date 12-15-2017 5:00 pm
Registration Start Date 06-01-2017
Capacity 16
Registered 0
Available place 16
Cut off date 12-01-2017
Individual Price $2,950.00
Location
Almaty
Gaidar St, Almaty, Kazakhstan
Almaty
$2,950.00 16

We are no longer accepting registration for this event

This is a hands-on course that will focus on why pore geometry must be the focal point for carbonate petrophysical analysis.  Participants will work with petrographic information, mineralogy data, routine core analysis, capillary pressure, electrical rock properties, NMR, and open hole logs.   The importance of Core-Log integration and cross calibration will be shown, as well as the reduction of uncertainty in computed reservoirs properties. 

During this five day course, participants will learn about why the petrophysical property analysis is often the key to building a static reservoir description.  However, in carbonates, a model that is not cross calibrated from core to logs to seismic, it may result in a large statistical uncertainty.  They will also learn about carbonate pore geometry, carbonate systems, total and effective porosity, lithology, and mineralogy.  A portion of this course will also focus on core-log calibration, quicklook log analysis, applied capillary pressure, and applied flow units.

Event Date 01-08-2018 8:00 am
Event End Date 01-12-2018 5:00 pm
Registration Start Date 09-05-2017
Capacity 16
Registered 0
Available place 16
Cut off date 12-15-2017
Individual Price $2,950.00
Location
Almaty
Gaidar St, Almaty, Kazakhstan
Almaty
$2,950.00 16

We are no longer accepting registration for this event

This course covers the necessary fundamentals of geomechanics for wellbore applications; the origin of stresses in the subsurface and how in situ stresses can be understood from wellbore data; mechanical properties such as rock strength, and the origins of pore pressure and how it is measured and estimated. The course then proceeds to show how these data are applied through the Mechanical Earth Model to critical problems in exploration and field development. There are detailed case studies on wellbore stability sand production and hydraulic fracturing. The course also includes an introduction to reservoir geomechanics, showing the geomechanical influence of pressure changes in the reservoir.

At the end of the course attendees will be able to:

  • Use routinely collected and specialized data to make basic geomechanical calculations for wellbore stability, sand production and hydraulic fracturing
  • Select and design data acquisition for geomechanical studies
  • Interpret image data to identify basic geomechanical behaviour

This course is also available as a 3 day class without classroom exercises 

Event Date 01-22-2018 8:00 am
Event End Date 01-26-2018 5:00 pm
Registration Start Date 06-01-2017
Capacity 16
Registered 0
Available place 16
Cut off date 08-04-2017
Individual Price $2,950.00
Location
Almaty
Gaidar St, Almaty, Kazakhstan
Almaty
$2,950.00 16

We are no longer accepting registration for this event

Fractured reservoirs such as tight carbonates and basements set complex challenges to appraisal and development teams due to their high degree of heterogeneity and hard-to-predict reservoir quality. A multi-disciplinary approach that draws on sedimentology, diagenesis, structural geology, rock mechanics and reservoir engineering techniques has to be applied.

This course provides geologists and reservoir engineers with the essential knowledge needed in the real-world business context where management of risk and reduction of uncertainties is important. The objective is to present the key technical issues in geology, geomechanics and engineering and illuminate the range of tools and techniques available to tackle them (along with their limitations). A constant theme is to illustrate these issues with case histories from the industry.

The course is intended to be interactive in that delegates are encouraged to participate in discussions so that key points are openly scrutinised.

A constant theme of the course is to apply ‘first principles’ from geological science to the results generated by reservoir characterisation tools, techniques and modelling softwares. With due attention to these principles the technical and commercial risks associated with fractured reservoir hydrocarbon developments can be mitigated.

Event Date 01-29-2018 8:00 am
Event End Date 02-02-2018 5:00 pm
Registration Start Date 09-05-2017
Capacity 16
Registered 0
Available place 16
Cut off date 01-15-2018
Individual Price $2,950.00
Location
Almaty
Gaidar St, Almaty, Kazakhstan
Almaty
$2,950.00 16

We are no longer accepting registration for this event

Market Update

Events Booking - Cart

Your cart is empty

myWeather

84°
28°
°F | °C
Partly Cloudy
Humidity: 18%
11 mph
Wed
Partly Cloudy
58 | 84
14 | 28
Thu
Scattered Thunderstorms
56 | 82
13 | 27
Fri
Partly Cloudy
57 | 83
13 | 28
Sat
Scattered Thunderstorms
61 | 79
16 | 26

RFP

Request For Proposal

Contact directly, under no obligation of service, one of our top technical team member to obtain timely solution suggestion and or collaboration for your current and upcoming project.
Invalid Input
Pls write a brief description of what you would like us to review with you. Thank you.
Please type your full name.
Invalid Input (10 digit minimum)
Invalid Input
Invalid email address.
Pls Share your Role in the Exploration and Appraisal Team





Please specify what type of entity your company is
Well would like to have an idea of the size of your company.
Pls advise how best to reach you
Invalid Input
Robot or Not
Invalid Input

Login Form



Login to access Detail Technical Materials